EdingCNC Post processors
We offer this list of EdingCNC port processors ‘as is.’ The reason is that we can’t support and test all available CAM software.
We rely on users of these CAM software to send us their post-processor, which we appreciate enormously.
If you have a post-processor not shown in the list below, please send it to us so we can add it.
Our G-Code standard RS274 is derived from Fanuc, but Fanuc also has different dialects.
For that reason, we don’t have a complete list of supported CAM software.
As long as the CAM software can output G-Code compatible with our software, that CAM software can then be used with Eding CNC.
It is possible that you can get CAM software to work with our software if the postprocessors are adjusted a bit.
A good place to start is postprocessors for Linux CNC, MACH3, or FANUC.
CAM software that works with EdingCNC, and we recommend:
CAM software names that are reported to work by our customers:
The list below is not verified by EdingCNC
- ArtCAM
- SheetCAM
- CamBam
- EstlCAM
- Vectric products
- Inventor
- FreeCAD
- SprutCAM
- MasterCAM
- Mechsoft (Rhino CAM and many others)
- Mechsoft Visual Mill
- Mechsoft Visual Turn
- BobCAD
- Espirit
- AlibreCAM
Please note that we do not have any control over any of the software listed above or the postprocessors they offer. Therefore, we cannot offer support for these or provide information about third-party CAM software, such as exact version/configuration; the list is entirely based on our customers’ feedback.
Q & A
Q. How can I make my own post-processor ?
A. If there is not an EdingCNC or USBCNC (our old company name) post processor included, have a look at this page for more information.
Post processors download
ArtCAM
Autodesk (Inventor)
Collection of post-processors and info, also on 4th axis, and multi axis setups.
ECAM
Estlcam
Thanks to Jörg Weißenberg (Meister Woodworker)
MasterCAM
MECsoft
Vectric
SheetCAM
