CNC720 4 Axes incl. software license
Price (ex VAT): € 395,00
Category: Pro
CNC720 4 Axes incl. software license
   
Documentation PC Software Firmware Images    360 degrees view       

 

CNC720 CNC Controller

 

This new control is a 4-axis controller with a maximum step frequency of 400 kHz. This control can be used and configured entirely via Ethernet.

In addition, it has an RS485 connection with which it is possible to provide it with additional I / O, and will therefore also new

possibilities can be provided in the future. This card is fully 24V controlled, making it easy to use in the standard 24V environment of

many systems. Almost all inputs are also suitable for 24V, whereby it is also possible to configure those inputs for an NPN or PNP application.

Furthermore, this control has an E-STOP input that switches off hardware outputs in the event of an E-STOP situation.

Due to the fast hardware, it is also possible to engrave with a laser in which on / off switching behavior AND power can be regulated on-the-fly.

 

Technical data:

  • 4 axis CNC controller
  • 400kHz stepfrequency
  • Ethernet interface

 

Outputs:

  • - 4x step/direction/enable/enable open collector (400 kHz)
  • - AUX (open collector)
  • - PWM (open collector) / 0-10V
  • - System ready
  • - No E-STOP (open collector)
  • - Tool 
  • - 2x Cool 
  • - Run
  • - Pause
  • - Charge pump
  • - RS485 (Modbus RT)

 

Inputs:

  • Handwheel (A/B)
  • 2x Analogue 
  • 4x Home
  • E-stop 
  • Probe / Tool sensor
  • Spindle sensor

 Others:

  • Power: 24VDC
  • Dimensions: 100 x 107mm
  • Gross weight:
  • Net weight:

 

All signals are also present on boxheader, for easy connecting the setup there is of course also a breakout board available.

 Accessories:

   
Break-Out
Board

DIN Rail
Bevestiging

 


Documentatie

Productsheet
Hardware manual
Comparison between CNC310 vs. CPU5A vs. CNC720 

 


 Images

 

 


 Firmware

Bootloader application

Bootloader application manual

Firmware CNC720 V1.02